EA3000 TITAN Automated Edger
Out of stock
High Throughput TITAN Edger with Board Scanning
The TITAN Automated Edger uses optical scanning technology to achieve high precision and low waste edging of boards. The entire edging process is automated with each board being positioned and then scanned.
- Extra Heavy Duty Construction
- Lower Labour Requirements
- Efficient Timber Handling
- Optical Computer Scanning for optimal recovery
Description EA3000 TITAN Automated Edger
The TITAN Automated Edger uses optical scanning technology to achieve high precision and low waste edging of boards. The entire edging process is automated with each board being positioned and then scanned. The profile of each board is analyzed by a computer, which decides on the best product to maximize recovery. Decisions are based on both volume recovery and product value.
The V-AE is capable of handling up to 12 boards per minute at 6.7m (22') or 15 boards per minute at 3.4m (11'). It is the ideal machine to edge boards coming from the TITAN Resaw. Electric servo sizing system achieves any width of cut without complication.
Parallel PLC / computer control systems allow the machine to be switched over to manual mode with a single button. Online support allows our technicians to dial into your machine to troubleshoot it remotely.
Overall, the TITAN Automated Edger is a simple, robust and automated solution to your edging needs.
- Optical scanning on the run
- Short footprint
- Can be fed from both sides
- Unscrambler and infeed included
- Easy to use windows interface
- Mechanised material handling for fast, accurate board alignment
Features EA3000 TITAN Automated Edger
Specifications EA3000 TITAN Automated Edger
|Power Selections||30 kW (40 HP) Electric45 kW (60 HP) Electric|
|Min. Width of Cut||40 mm|
|Max. Material Thickness||75mm (3")|
|Production Rate||1-25 boards/min (average)|
|Number of Blades||2|
|Blade Diameter||450 mm (17 1/2")|
|Blade Kerf||5 mm (0.195”)|
|Blade Adjustment Method||Electric Servo|
|Blade position||Two Centered Blades|
|Feed System & Operation|
|Feed Speed||150 - 250m/min (500 - 820ft/min)|
|Board Alignment||Automated mechanical board alignment|
|Material Hold-down||Powered Pneumatic Roller Hold-downs|
|Feed Motor||11kW (15HP)|
|Scanning||Optical Material Scanner System|
|Operator Controls||Stationary Control Station|
|Options||In-line or transverse board scanning|
Write Your Own Review